LC Flow Meter is an instrument used to measure the flow rate of linear, nonlinear, mass or volume of liquid, gas or solid.There are deed-rite - fuelrite -lc - meter for oil, diesel, gasoline | transfer pumps for diesel fuel, diesel, oil.

Flow Meter LC M-50-CX-10 Specifications 1.    Accuracy:0.2%2.    Repeatability:less than 0.05%3.    Flow Rate:38-550L/min4.    Medium:LPGAdvantages 1.    Excellent stepless adjusting mechine2.    High accuracy and repeatability over the widest range of flow Superior accuracy at constant flow3.    Low maintenance, no metaltometal contact in measuring chamber, Long life service4.    Low pressure loss, a true gravity flow meter5.    Accuracy regardless of pressure fluctuations, temperature variation, viscosity6.    Choice of aluminum, cast iron, brass and stainless steel materials of construction.

Excellent stepless fine-tuning device allows plus-minus calibration of flowmeter;High accuracy and repeatability within the large range of flow; Superior accuracy of constant flow; Low maintenance, low wear, long working life; Low pressure loss, genuine gravity flowmeter; Accuracy regardless of pressure fluctuations, temperature variation, viscosity; Aluminum, cast iron and stainless steel materials of construction for choice.Basic Info•    Model NO.: TCS-50-C-1•    Main Application: Diesel Fuel, Fuel Oil•    Sensor: Tube/Flange•    Type: Volume Type Flow Meter•    Measuring Principle: Electrical Principles•    Certification: CE•    Trademark: JIASONG•    Specification: CE, SGS•    Accuracy: ≤±0.1%•    Size: DN10-50•    Application: Transportation•    Measuring Media: Liquid•    Measurement Object: Open Channel•    Place of Origin: Zhejiang China (Mainland)•    Transport Package: Standard Packing•    Origin: China

Flow Meter LC M10 2″ 50mmFlow meter LC M10Maximum Nominal Flowrate :150PM570 L/Min34 M3/HourFlange Size : 2″ (50mm)Maximum Working Pressure : 150PSI (10,5 BAR)

flow meter LC M-25-A-2Capacity: 300 GPM (1,135 L/min.)• Case made of aluminum with meter element componentsof various materials as required for Class 1 & 2 constructionfor metering refined petroleum products includingaviation fuels.• Supplied in choice of 3″ NPT and 3″ BSPT companionflanges. Also 3″ aluminum or steel welding flanges.

Oil Flow Meter LC M40Features and Benefits LC meters are exclusively engineered with no metal-to-metal contact within the measuring chamber, making use of a thin liquid capillary film between rotating and stationary components for hydraulic sealing. This unique design results in minimal wear, sustained accuracy, and low operating costs. When measuring the flow of a broad range of products, LC’s innovative design results in minimal resistance to flow and the ability to operate on pump pressure or gravity feed. That means efficient performance and low pressure drop across the meter. LC’s combination of low pressure drop with minimum seal or slippage area offers better accuracy over a wide range of flow than other commercially produced PD meters.                    Oil Flow Meter LC M40Size: 4 inchAccuracy : ± 0.2%Repeatability: ≤ 0.05 %Standar Measurement: Unit Liter / US Gallon / imperial GallonMax Working Temperature: – 40 to 160ºF (-40 to 71ºC)Meter Body: Aluminium , Cast iron , Steel , Stainless steel availableConnections: ANSI Flanged , NPT , BSPT , Slip Woled AvailableCapacity: 1,700L/Min ( 450 GPM )Max.Pressure: 10.5Bar/150 PSIType: Direct Reading

Oil Flow Meter LC M15Features and Benefits LC meters are exclusively engineered with no metal-to-metal contact within the measuring chamber, making use of a thin liquid capillary film between rotating and stationary components for hydraulic sealing. This unique design results in minimal wear, sustained accuracy, and low operating costs. When measuring the flow of a broad range of products, LC’s innovative design results in minimal resistance to flow and the ability to operate on pump pressure or gravity feed. That means efficient performance and low pressure drop across the meter. LC’s combination of low pressure drop with minimum seal or slippage area offers better accuracy over a wide range of flow than other commercially produced PD meters.Accuracy : ± 0.2%Repeatability : ≤ 0.05 %Standar Measurement : Unit Liter / US Gallon / imperial GallonMax Working Temperature :-40 to 160ºF (-40 to 71ºC)Meter Body : Aluminium , Cast iron, Steel , Stainless steel availableConnections : ANSI Flanged , NPT , BSPT, Slip Woled AvailableCapacity    : 757 L/Min ( 200 GPM )Max.Pressure : 10.5Bar/150 PSIType : Direct Reading

Oil Flow Meter LC M80Size : 6 inch,4 inch optionalAccuracy : ± 0.2%Repeatability :≤ 0.05 %Standar Measurement : Unit Liter / US Gallon / imperial GallonMax Working Temperature :-40 to 160ºF (-40 to 71ºC)Meter Body : Aluminium , Cast iron , Steel , Stainless steel availableConnections : ANSI Flanged , NPT , BSPT , Slip Woled AvailableCapacity : 3,000L/Min ( 800 GPM )Max.Pressure : 10.5Bar/150 PSIType : Direct Reading

flow meter LC M7 size 2 inchProduct DescriptionCharacteristicExcellent stepless fine-tuning device allows plus-minus calibration of flowmeter;High accuracy and repeatability within the large range of flow; Superior accuracy of constant flow; Low maintenance, low wear, long working life; Low pressure loss, genuine gravity flowmeter; Accuracy regardless of pressure fluctuations, temperature variation, viscosity; Aluminum, cast iron and stainless steel materials of construction for choice.Size 7 Fitting Size 2 Inc Max. Nominal Flow Rate100 GPM Max. Nominal Flow Rate 378 LPM Max. Nominal Flow Rate23 M3/H Max. Pressure 150 PSI Max. Pressure 10.3 BAR Max. Pressure 1034 kP